CMC® Introduces the ROTO-LUG™ Line of Electrical Connectors
Featuring Turning Point Technology
Connector Manufacturing Company (CMC®) is pleased to introduce the new ROTO-LUG™ connector product line. ROTO-LUG™ connectors have the built-in Turning Point rotational feature that allows up to 219º positioning in all directions: front-and-back and side-to-side. The built-in rotation feature significantly reduces installation time and the amount of conductor needed as it allows the installer to bring the connector to the conductor by quickly adjusting the angle of the connector to accommodate the conductor. ROTOLUG ™ connectors are range taking and accommodate both copper and aluminum conductors. ROTO-LUG™ connectors are cULus Listed for wire terminations.
Over the years, wire has become larger in size while at the same time switchgear boxes and breaker boxes have become smaller and more compact. Electrical contractors must bend large diameter wire in order to install it in the fixed lugs available today. Often, bending is accomplished by heating and machine-bending the wire beyond limits allowed by codes and safety for lack of an alternative. CMC’s ROTO-LUG™ connectors provide a superior connection in 50% less time as standard termination methods where the need to bend the wire is present.
Acquired by BURNDY in 2013, CMC was established in the early 1940s and relocated to Cincinnati, Ohio, in 1976. CMC has 3 primary sites totaling over 206,000 square feet of production. CMC is a full line manufacturer of aluminum and copper connectors, offering both mechanical and compression designs. In addition to its utility products, CMC manufactures connectors for meter socket terminals, load center neutral bars, switch gear terminations, commercial panel boards, circuit breakers, motor controls and pole line hardware, wind energy products, solar energy products, and enclosures. For additional information contact 513-860-4455 or see our website: www.cmclugs.com.
Customer Service 513-860-4455 l Canada 1-800-361-6975 l Mexico 011-52-722-264-4400 l www.cmclugs.com